Cryz/arduino_pong
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

updated README

Browse Source
This commit is contained in:
andrea
2026-03-15 11:19:36 +01:00
parent 748cf6a678
commit f710fb2a0e
1 changed files with 19 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
README.md
View File

@@ -41,3 +41,22 @@ Component Arduino Pin Function
- Bouncing: When the ball hits a paddle, the X direction is reversed and the hits counter increases. - Bouncing: When the ball hits a paddle, the X direction is reversed and the hits counter increases.
- Speed Scaling: Every 6 successful hits (hits >= 6), the loop_delay decreases by 20ms, speeding up the action until a minimum limit of 80ms is reached. - Speed Scaling: Every 6 successful hits (hits >= 6), the loop_delay decreases by 20ms, speeding up the action until a minimum limit of 80ms is reached.
- Scoring: If a player misses the ball, the opponent scores a point. The ball then resets to the center with a randomized direction. - Scoring: If a player misses the ball, the opponent scores a point. The ball then resets to the center with a randomized direction.
# 🛠️ Development
This project includes a `Makefile` to automate the workflow using `arduino-cli`.
### Prerequisites
* [Arduino CLI](https://arduino.github.io/arduino-cli/latest/) installed.
* Arduino UNO R4 core installed:
`arduino-cli core install arduino:renesas_uno`
### Commands
| Command | Description |
| :--- | :--- |
| `make compile` | Compiles the sketch without uploading. |
| `make upload` | Uploads the compiled binary to `/dev/ttyACM0`. |
| `make monitor` | Opens the Serial Monitor. |
| `make run` | Full cycle: Compile + Upload + Monitor. |
> **Note:** If your board is on a different port, edit the `Makefile` or override it: `make upload PORT=/dev/ttyUSB0`.